Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Westgate
A new driveway gate in Westgate typically runs $2,800 to $7,500 installed, depending on whether you’re hanging a single swing gate or a full sliding gate with an operator. Most Westgate installs take one to two days on site once materials are in hand. If you’re weighing whether to repair an older gate or replace it outright, the age of the operator and the condition of the post footings usually decide it. We work across Westgate regularly, from the blocks off Westgate Avenue down toward the homes near Okeechobee Boulevard, and we know the county permitting path cold. Call (940) 412-7340 and Dean Prescott can walk you through what your specific property needs.
Why Portcullis Gate Repair Is Westgate’s Preferred Gate Installation Company
Westgate is unincorporated Palm Beach County, and that changes how a gate installation gets permitted. Dean Prescott has shepherded dozens of Westgate jobs through the county Building Division, including wind-load reviews that city-based contractors in West Palm Beach sometimes don’t know to expect. When a Westgate homeowner calls us about a new gate, the first thing we check is whether the job triggers a permit. The second is whether the existing post footings will pass county wind-load amendments, because that’s where older Westgate installs most often stall.
Our crews arrive in uniform and give you a written price before a single bolt is turned. That’s not a sales tactic. It’s the Kingswell Guarantee, and every Portcullis location is independently owned and operated but held to the same four promises: written price, real arrival window, clean job site, written guarantee on the repair. Westgate homeowners who’ve been burned by no-show gate companies tend to appreciate that Dean Prescott is a Kingswell company owner, not a call-center rep. Our customers in Westgate routinely mention two things: the live person who answered the phone, and the fact that the price on the invoice matched the quote.
Gate Installation Services in Westgate
Gate Installation Services in Westgate start with an honest assessment of what you have and what you actually need. For a 1950s block home off Westgate Avenue with an ornamental steel gate, the job usually means pulling the old posts, pouring new footings to current Palm Beach County wind-load standards, and hanging a new gate with proper hinge plates and a reinforced post core. We build for South Florida humidity, which means galvanized hardware, sealed welds, and operators with sealed control housings. A single driveway swing gate in Westgate runs roughly $2,800 to $4,500; a double gate run, $4,500 to $7,500. We quote it in writing before work begins.
Driveway and Double Gate Installs
Driveway gates are the most common install we do in Westgate, and double gates dominate because so many of the original homes here have wide two-car aprons. We check the driveway slope and the hinge post alignment before we spec anything, because a gate hung on posts that shift will drag within two years. On double gates we recommend an automation-rated center stop and a reinforced drop rod.
Pedestrian Gate and Access Control
Pedestrian gates carry lighter loads but still get hammered by lightning and humidity. We install walk gates with stainless hinges and closers sized to the gate weight, and we can tie in a keypad or intercom without a full operator teardown. If you’re adding a call box, we wire it to the same panel rather than leaving a pigtail mess.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Electric Gate Installation in Westgate
Electric Gate Installation in Westgate is where old homes and new safety code meet. The biggest issue we see is a 1990s operator that has no UL 325 compliant safety edges and no photocells, and the county will flag that when a permit gets pulled. A typical electric swing gate install with a current operator, safety photocell pair, and associated wiring runs $3,200 to $5,800 in Westgate. A sliding gate with a motor and rack gear runs higher, usually $4,800 to $9,500, because the track and rack often need to be replaced along with the operator.
Swing Gate Operators
Most Westgate swing gates from the 1990s and early 2000s ran on brands that are now discontinued. When the control board dies, we often can’t source a drop-in replacement. We’ll tell you honestly whether a current Viking or DoorKing actuator can reuse your existing hinge geometry, and what it costs to bring the safety edges up to current UL 325 compliance while we’re in there.
Sliding Gate Operators and Rack Gear
Sliding gates in Westgate are less common on residential lots but do show up on larger properties and some commercial entries along Okeechobee Boulevard. The failure mode is almost always stripped rack-and-pinion gear, where years of humidity and infrequent greasing have worn the teeth. If the rack is worn, we replace the rack and gear together, because a new operator on a stripped rack will fail inside a year.
Trusted Brands We Service in Westgate
We stock parts and service experience for the brands Westgate homes actually run, including Viking, Ghost Controls, and DoorKing. When a 2002 Viking swing arm comes in with a dead transformer, our tech knows the swap before the truck arrives. When a Ghost Controls keypad won’t accept a code after a storm, we carry the replacement board. We don’t make you wait on a distributor in Miami. For Westgate customers we keep common control boards, photocells, and transformer kits on hand so the job doesn’t stretch across two weeks of shipping.
Common Gate Installation Problems We See in Westgate Homes
- Obsolete 1990s control boards that can’t be sourced. We see discontinued LiftMaster and FAAC boards in Westgate homes every month. When the board is gone, the practical fix is usually a new operator, and we’ll show you the numbers for both paths before you commit.
- Corroded hinges on original tubular steel gates. South Florida humidity and hard water eat pivot pins from the inside. A gate that won’t swing true is usually a hinge corrosion problem, not a gate weight problem.
- Post footings that fail current wind-load review. Many Westgate posts were poured decades ago under looser rules. When you add a new operator, the county Building Division often requires the footing to meet current wind-load amendments, which means pouring new footings alongside the install.
- Stripped rack gears on later-added automation. Gates that were manual originally and got automated in the 2000s often have under-spec racks. The teeth wear unevenly under a motor load, and we see this on double driveway gates more than anywhere else in Westgate.
Pricing for Gate Installation in Westgate, FL
Here are real numbers for Westgate’s market. A single driveway swing gate with a current operator and one photocell pair: $3,200 to $5,800. A double swing gate install: $4,500 to $7,500. A sliding gate with track work and new rack gear: $4,800 to $9,500. A pedestrian gate with a closer and keypad: $1,800 to $3,200. What moves the price in Westgate is rarely the gate itself. It’s the footing replacement when a 1968 post doesn’t pass wind-load review, and the safety-edge retrofit when an old operator gets upgraded. Everything is quoted in writing before work starts. Estimates are free. Call (940) 412-7340 and ask for Dean Prescott.
We Also Serve Cities Near Westgate
Our Gate Installation team covers Westgate and the surrounding region. We do work in Jacksonville, Miami, Tampa, and Orlando, with the same written-price guarantee and the same clean-job-site standard on every job. If you’re just outside Westgate, call us anyway. We’ll tell you straight whether we can get a crew to your street this week.
Serving Westgate, FL - Our Local Coverage Area
We’re based in the Westgate area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Westgate
No. Westgate is unincorporated Palm Beach County, so your gate installation goes through the Palm Beach County Building Division, not the City of West Palm Beach. The county requires that automated gates meet the wind-load amendments in the Florida Building Code, and this is the step out-of-area contractors miss. Call (940) 412-7340 and we’ll confirm what your specific project triggers before we schedule anything.
Sometimes, but for many 1990s Westgate operators the board has been discontinued for a decade and there’s no reliable aftermarket source. We’ll check the model number against what’s actually obtainable. If the board is orphaned, replacing the whole operator is usually cheaper than chasing a used board that fails again in six months. We’ll quote both paths in writing before you choose.
Because the hinge post footing has shifted. In Westgate we regularly see post footings poured shallow in the 1960s and 1970s that now move under the gate’s weight. Replacing hinges doesn’t fix a moving post. We cut and re-pour the footing to current county wind-load specs, then re-hang the gate so it closes squarely. On a 1968 block home near Westgate Avenue we did exactly that after a lightning strike fried a LiftMaster operator, and the gate now passes county inspection without custom fabrication.
Any new automated gate must meet UL 325, which means primary and secondary entrapment protection. That’s typically a photocell pair across the gate opening plus a monitored safety edge, and for swing gates, a design that can’t crush a person against a fixed wall. We install this on every electric gate job in Westgate regardless of whether the permit office audits it. It’s the difference between a gate that’s legal and a gate that’s safe.
Yes. Westgate sits in Palm Beach County’s summer lightning corridor, and we field a spike of control-board and keypad failures after almost every afternoon storm cycle. The board, the safety-sensor wiring, and the keypad are the usual casualties. A surge-rated disconnector and proper grounding reduce the odds, and we include those on new installs as standard. Call (940) 412-7340 for a quote, and we’ll tell you what’s worth adding and what isn’t.
Written by Dean Prescott, Owner at Portcullis Gate Repair, serving Westgate homes and businesses as a Kingswell company.