Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Automatic Gate Installation Nationwide
An automatic gate should open when you tell it to, stop when something is in the way, and keep doing both for years without a service call every season. Portcullis Gate Repair has handled automatic gate installation for homes and businesses across the United States since 2008. We’re a Kingswell company, which means you get a written price before any work begins and a written guarantee when the job is done. Our background-checked, uniformed technicians arrive in a real arrival window and leave your property clean. If you’re ready to talk through an automatic gate, call us at (940) 412-7340, and a live person will answer.
Automatic Gate Installation
Automatic gate installation means fitting a motorized operator, a control board, and a set of safety devices to a swing or sliding gate so it opens from a remote, a keypad, a phone app, or a vehicle sensor. People usually ask for it after one too many rainy mornings spent getting out of the car to drag a gate open, or when they want real control over who reaches the front of the property. Portcullis Gate Repair handles the whole scope: checking the gate and posts, mounting the operator, running the wiring, setting travel limits, and programming every remote. Most automatic gate installations run from $2,500 to $9,500, depending on gate installation pricing, the size of the gate, and the operator you pick. A mid-range swing gate with a quality operator usually lands between $4,000 and $7,000.
Adding Automation to an Existing Gate
If you already own a sound gate, we can often automate it without replacing anything. We check the weight, the hinges, and how plumb the posts are first. A gate that binds by hand will bind under power too, so we correct that before the operator goes on.
Installing a New Gate and Operator Together
When the gate is old, rusted, or the wrong size, it is often cheaper to install the gate and operator as one job. The operator can be matched to the actual weight of the new gate, and the posts can be set to carry it from day one. See our gate installation page for the gate side of that work.
Automatic Gate Installation Services
Our automatic gate installation services cover single and double swing gates, sliding gates, and cantilever gates on residential driveways, farm and ranch entries, apartment communities, and commercial lots. You need this service when you are tired of opening a gate by hand, when a property needs controlled access, or when an older operator has died and the gate needs a modern system. Every job starts with a site visit and a complete written quote for materials and labor. Nothing is added to the price afterward.
Homes and Private Driveways
We size the operator to the gate and the slope of the drive, set the safety sensors, and program remotes for everyone in the household. You’ll have a working remote in your hand before we leave.
Commercial and Shared Entrances
Busy lots and shared lanes need heavier-duty operators, vehicle loops, and keypad or intercom access. We build in battery backup so the gate still works when the power does not.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Automatic Swing Gate Installation
Automatic swing gate installation is the most common request we get, because most driveways have a gate that already swings. A swing gate opens on hinges, so the operator has to push and pull the leaf through its full arc without fighting the post or the ground. Portcullis Gate Repair installs articulated arm, linear actuator, and underground operators, and we pick the type based on your post size, how far the gate swings, and how much room you have behind it. Automatic swing gate installation typically runs from $2,500 to $7,500 for a single gate. Double swing gates with two operators run from $4,500 to $11,000.
Single vs. Double Swing Operators
A single gate needs one operator. A double gate needs two, and they must be synchronized so the leaves meet in the middle without clipping each other. We set a delay on one leaf so they close in the right order every time.
Mounting Position and Post Strength
The operator pushes hard on the post every time it runs. If the post is undersized or set shallow, it will lean and the gate will start to drag. We check the post and the footing first, and we quote any reinforcement as its own line item.
Automatic Sliding Gate Installation
Automatic sliding gate installation makes sense when there is no room for a gate to swing, when the driveway climbs steeply from the street, or when the opening is wide. A sliding gate rolls sideways along a fence line, driven by a chain, belt, or rack-and-pinion operator. Portcullis Gate Repair installs both track-guided and cantilever sliding gates. Automatic sliding gate installation usually costs $3,500 to $10,500, and cantilever systems sit at the upper end because the counterbalance section makes the gate frame longer and heavier.
Rollers, Tracks, and Clearance
A sliding gate needs a clear path along the fence line, roughly the width of the opening plus a little extra. We walk that path before quoting so we do not discover a tree root or a utility box halfway through the job.
Chain, Belt, and Rack Drives
Chain drives suit heavier gates and are common on commercial properties. Belt drives run quieter and work well on residential lanes. We match the drive to the gate weight, not just its width.
Driveway Gate Opener Installation
Driveway gate opener installation is the motor, control board, and power supply that make a gate automatic. If you already have the gate, an opener install alone generally runs from $1,200 to $4,000. High-end commercial operators with battery backup and intercom integration can pass $6,000. Our technicians test the limit settings, the force settings, and the reversing function before we call the job finished. If an older opener has failed, our gate opener repair team can tell you whether the unit is worth saving or whether a new installation is the smarter spend.
Control Board and Wiring
Low-voltage control wires run from the operator to the keypad, the safety sensors, and the power supply. We use properly rated cable and sealed connections, because moisture in a splice is one of the most common reasons a new system fails in its first year.
Limit Settings and Force Adjustment
Travel limits tell the gate where fully open and fully closed are. Force settings control how hard it pushes before it gives up. Set too light, the gate stops on every breeze. Set too heavy, it can hurt someone. We set both to manufacturer specifications.
Access Controls and Safety Devices
An automatic gate is only as good as the way you get through it and the way it protects people. Every installation we do includes safety devices that detect an obstruction and stop or reverse the gate. On top of that, you choose how people get in. Remotes are the baseline. Keypads, intercoms, vehicle loops, and phone apps add convenience and control.
Photo Eyes and Reversing Edges
Photo eyes sit on either side of the opening and send a beam across the path. If something breaks the beam, the gate stops. A reversing edge runs along the leading edge of the gate and backs it off on contact. We test both with a real obstruction, not just by looking at a light.
Keypads, Intercoms, and Phone Apps
A keypad lets guests and delivery drivers in with a code you can change at any time. An intercom lets you talk to a visitor and buzz them in. Smartphone control lets you open the gate from the road. If you already have a system that needs attention, we also handle gate motor repair on the operator side.
Power Options for Automatic Gates
An automatic gate needs electricity, and where it comes from changes the price. Most homes run a low-voltage line from a nearby outlet or panel, buried in conduit. Properties with a long driveway or no power near the gate often go solar. Portcullis Gate Repair installs both, and we will give you a straight recommendation based on the property.
Hardwired Power
A hardwired system runs power through buried conduit from your panel to the operator. It is the most reliable option, and it keeps the battery backup topped up. Trenching cost depends on distance and soil, and it is quoted separately.
Solar Power
A solar panel and battery pack can run a residential gate for days without sun. It avoids trenching entirely, which saves money on long runs. We size the panel and battery to how often the gate cycles per day.
Brands We Install and Service
We install and service LiftMaster, DoorKing, Elite, Mighty Mule, FAAC, BFT, Linear, Viking, and Ghost Controls operators. We choose among them based on your gate, not on which box we happen to have in the truck. Lighter residential swing gates often suit Mighty Mule or LiftMaster. Heavier or busier entries tend to call for DoorKing, FAAC, or a commercial-grade LiftMaster. Because our crews work on these systems every week, the technician who shows up already knows the wiring and the common quirks.
Signs You Need a Pro Right Now
- Your manual gate drags or sags. A gate that is hard to move by hand will not be fixed by a motor. Adding power to a bad gate burns out the operator quickly. The hinges or posts need attention first.
- Your old opener hums but the gate does not move. That usually means a failed capacitor, a mechanical bind, or a worn gear. Pressing the remote over and over can damage the control board.
- The gate reverses on its own. Misaligned photo eyes, a dirty sensor, or a limit switch out of range are the usual causes. A gate that will not close leaves your property open.
- You have an operator that is more than 12 years old. Older units lack modern safety features and the parts are getting harder to find. A new installation is often cheaper than another repair.
- You see exposed or chewed wiring near the control box. Even low-voltage wiring causes shorts and dead systems when it is damaged, and the control box can still carry line power. Have a trained technician look at it.
Our Process, Step by Step
- 1
You call and get a live person. Our phones are answered 24 hours a day, seven days a week, by a human being. You tell us what you have and what you want, and we book a site visit in a real arrival window.
- 2
We inspect, measure, and quote in writing. A technician checks the gate, the posts, the ground, and where power can come from. You get a written price for materials and labor before any work is authorized. That is the Kingswell Way: say the price before the work.
- 3
We order the operator and parts. We confirm the operator, sensors, and access controls against the quote so nothing changes on installation day.
- 4
Installation and wiring are completed. We mount the operator, run conduit and cable, install the safety devices, and set limits and force. Every function is tested: open, close, stop, reverse, and remote range.
- 5
You get a walkthrough and a written guarantee. We walk through the system with you, hand over every remote and manual, and put the Kingswell Guarantee in writing on your invoice. If it fails inside 365 days, we return and fix it at no charge under the 365-Day Done Right Promise.
How Much Does Automatic Gate Installation Cost?
A basic automatic swing gate operator installed on an existing gate typically runs from $1,200 to $4,000. A complete automatic gate installation, with a new gate, operator, safety sensors, and keypad access, lands between $4,000 and $12,000 for most residential properties. Sliding and cantilever systems cost more than swing gates because of the track, the longer frame, and the heavier drive. The biggest variables are gate width, material, the distance to power, and whether the posts need to be replaced or reinforced. Commercial systems with heavy-duty operators, vehicle loops, and battery backup often start around $9,000. A low quote that leaves out wiring, sensors, or post work will have to be corrected later, which is why we write everything down before work starts. Your free estimate lists the full scope: materials, labor, removal of an old gate or operator if needed, and the written guarantee.
Permits and Local Rules
Many towns and counties require a permit for an automatic gate, especially when it crosses a public easement, sits close to the street, or ties into the main electrical panel. Some neighborhoods and HOAs also limit gate height, style, or color. We tell you what to expect before the job is scheduled and list any permit cost on the written quote, so it never arrives as a surprise. Emergency access is another rule worth planning for. Many fire departments require a way to open a gate during an emergency, such as a Knox box or a siren sensor, and we can add one to your system.
Where We Work
Portcullis Gate Repair serves homeowners and businesses across the United States through local crews. Every location is independently owned and operated, and every one is held to the same Kingswell Guarantee. The truck that pulls into your driveway carries the same standard as every other Portcullis location: a written price, a real arrival window, a clean job site, and a written guarantee on the installation. You can also start from our home page to see everything we do, including driveway gate repair.
Frequently Asked Questions About Automatic Gate Installation
Automatic gate installation is the process of adding a motorized operator, control board, and safety devices to a gate so it opens and closes on its own. It includes checking the gate and posts, mounting the operator, running power and control wiring, and programming remotes and keypads. The job ends with testing every function and handing you a written guarantee.
Adding an operator to an existing gate usually takes one day on site. Jobs that involve trenching, new posts, or a custom fabricated gate take longer, and we give you the schedule in writing when we quote the work.
Most residential automatic gate installations run from $2,500 to $9,500, and complete systems with a new gate can reach $12,000 or more. The price depends on gate size, operator brand, access controls, and the distance to power. Call (940) 412-7340 for a free written estimate with the full scope itemized.
Often, yes. We check the weight, hinges, and posts first. If the gate swings freely by hand and the posts are solid, it usually takes an operator well. If it binds or sags, we correct that first, or we recommend a new gate so the motor is not fighting a worn frame.
It can. We install battery backup on request, and most operators also have a manual release so you can open the gate by hand. Solar systems keep running on their stored charge. Ask us about backup when you call so it is part of the written quote.
Every installation carries a written Kingswell Guarantee on the invoice. If the installation is not done right within 365 days, we come back and fix it at no charge. That is the 365-Day Done Right Promise, and it is the same across every independently owned Kingswell location.
Schedule Your Automatic Gate Installation Today
Ready for a gate that opens itself? Call Portcullis Gate Repair at (940) 412-7340 for a no-obligation written estimate. A live person answers around the clock. You’ll get a real arrival window, a clear price before any work starts, and the 365-Day Done Right Promise in writing.
Written by Dean Prescott, Owner at Portcullis Gate Repair, serving customers nationwide since 2008.