Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Motor Repair Nationwide
When a gate motor quits, the whole entrance stops working: cars sit in the street, deliveries turn around, and the gate may be stuck open overnight. Portcullis Gate Repair has handled gate motor repair for homes and businesses across the United States since 2008. We’re a Kingswell company, so every job starts with a written price before any work begins and ends with a written guarantee on the repair. Our background-checked, uniformed technicians arrive in a real arrival window and leave the site clean. If your gate won’t move, call us at (940) 412-7340 and a live person will answer.
Gate Motor
The gate motor is the electric drive that pushes, pulls, or rolls your gate. On a swing gate it sits inside an arm or ram. On a sliding gate it turns a chain, belt, or rack-and-pinion gear. Motors fail from worn brushes, burned windings, water in the housing, or years of working against a gate that binds. Portcullis Gate Repair tests the motor under load before replacing anything, because a motor that hums is often fighting a bad hinge, not dying on its own. Most gate motor repairs run from $250 to $900, and a full motor replacement usually lands between $600 and $1,800 depending on the operator brand.
Motor Testing on Site
We check voltage at the motor, the capacitor, the brushes, and the gear train. If the gate only moves with a hand push, the problem is usually mechanical, and we fix that first so a new motor doesn’t die the same way.
Repair or Replace
If a repair costs more than half of a new operator and the unit is over ten years old, we say so plainly. You decide with both prices in front of you. See our gate opener repair page for the full operator side of the job.
Gate Remote Control
A gate remote control that works one day and fails the next is rarely a gate motor problem, but it looks like one. Dead batteries, a weak receiver, a lost programming memory, or a remote that was never paired to the board all produce a gate that ignores you. Portcullis Gate Repair re-pairs remotes, replaces receiver boards, and clears old codes so lost remotes no longer open your gate. A remote and receiver repair generally runs from $120 to $450. We walk the range test with you before we leave.
Lost or Stolen Remotes
We wipe the receiver memory and program only the remotes you still have, so a remote that left with a former tenant or a stolen car stops working.
Short Remote Range
If you have to be at the gate before it responds, the antenna or receiver is usually the cause. We relocate or replace it so the remote works from the street.
Gate Keypad
A gate keypad lets guests, staff, and delivery drivers in without a remote. When the keypad dies, people start propping the gate open, which defeats the point of having one. Common faults are worn buttons, water inside the housing, a cut wire between the keypad and the board, and a forgotten master code. Portcullis Gate Repair replaces keypads, resets codes, and seals the new unit against rain. A gate keypad repair typically runs from $150 to $500, and wireless keypads sit at the higher end.
Wired and Wireless Keypads
A wired keypad needs an intact cable run back to the operator, so we test continuity before swapping the unit. A wireless keypad needs fresh batteries and a strong signal path, and we check both.
Code Management
We set a clean list of codes, remove the ones you no longer trust, and write down the programming steps so you can change them yourself later.
Gate Closer Spring
A gate closer spring pulls a pedestrian or small swing gate shut behind you. When the spring weakens or snaps, the gate stays open, slams, or swings back too slowly to latch. This matters most on pool gates and fenced yards where a gate left open is a safety problem. Portcullis Gate Repair replaces springs and hydraulic closers, adjusts tension, and checks that the latch catches every time. Expect most gate closer spring repairs to run from $90 to $350. A heavy commercial closer can cost more.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Operator Keypad
A gate operator keypad is the keypad wired straight into the operator’s control board, as opposed to a standalone access unit. It often doubles as the programming panel, so a failed one can lock you out of settings as well as the gate. Portcullis Gate Repair diagnoses whether the fault is the keypad, the ribbon connection, or the board behind it. Operator keypad and display repairs usually run from $180 to $600. We match the part to your operator brand so the replacement fits the first time.
Error Codes and Displays
Many operators flash a code when something is wrong. We read the code, confirm it against the manual, and fix the actual cause instead of clearing the message and leaving.
Gate Operator Repair
Gate operator repair covers the whole drive system: motor, control board, limit switches, safety sensors, and power supply. Portcullis Gate Repair works on LiftMaster, DoorKing, Elite, Mighty Mule, FAAC, and most other makes, so the technician who arrives usually knows your wiring quirks. Operator repairs generally run from $300 to $1,500. Replacing a whole operator on a standard residential gate costs about $1,200 to $4,000. If you’re deciding between the two, our gate opener repair and driveway gate repair pages explain each path.
Board and Limit Switch Faults
A fried board or a limit switch out of range makes a healthy motor look dead. We test both and replace only what failed.
When a New Operator Makes Sense
If you are also adding access control or upgrading a manual gate, a new unit may cost less than repeated repairs. Our automatic gate installation team can quote that at the same visit.
Signs You Need a Pro Right Now
- The motor hums but the gate does not move. That hum is the motor straining against a bind or a failed capacitor. Pressing the remote again and again can burn out the board.
- The gate stops halfway or reverses on its own. Misaligned photo eyes, a worn limit switch, or a motor losing force usually cause this. It can leave your property open without you noticing.
- You hear grinding or clicking from the operator. Stripped gears and worn bearings get worse every cycle. Catching them early keeps a small part from becoming a new operator.
- The gate runs only on battery or only by hand. A dead power supply, tripped breaker, or failed transformer needs testing before more damage is done.
- You smell burning near the control box. Burned windings or shorted wiring are a fire and shock risk. Cut power to the gate and call us.
Our Process, Step by Step
- 1
You call and get a live person. Our phones are answered 24 hours a day, seven days a week. You describe what the gate is doing and we book a real arrival window.
- 2
We diagnose before we quote. A technician tests the motor, board, sensors, and power. You get a written price for parts and labor before any work is authorized. That is the Kingswell Way: say the price before the work.
- 3
We fix it on the truck when we can. Common motors, capacitors, keypads, and boards ride with our technicians. If a part must be ordered, we tell you the timeline up front.
- 4
We test every function. Open, close, stop, reversal, remotes, and keypad all get checked through a full cycle.
- 5
You get a walkthrough and a written guarantee. The Kingswell Guarantee goes on your invoice. If the repair fails inside 365 days, we come back at no charge under the 365-Day Done Right Promise.
How Much Does Gate Motor Repair Cost?
Most gate motor repairs run from $250 to $900. A full motor replacement usually costs $600 to $1,800, and a complete operator replacement can reach $4,000 on heavier or commercial gates. Remote, keypad, and closer spring repairs are smaller jobs, typically $90 to $500. The biggest cost drivers are the operator brand, gate weight, and whether a mechanical problem like a sagging hinge is overworking the motor. A cheap quote that skips the root cause tends to come back as a second repair bill, which is why we write the whole scope down before work starts. Your free estimate lists parts, labor, and the guarantee.
Where We Work
Portcullis Gate Repair serves homeowners and businesses across the United States through local crews. Every location is independently owned and operated, and every one is held to the same Kingswell Guarantee. Whatever state you’re in, you get a written price, a real arrival window, a clean job site, and a written guarantee on the repair. You can also start from our home page.
Frequently Asked Questions About Gate Motor Repair
A hum with no movement usually means a failed capacitor, a stripped gear, or a mechanical bind such as a sagging hinge. Stop pressing the remote and call us. Repeated tries can burn out the motor or the control board.
If the operator is under ten years old and the repair costs less than half of a new unit, repair usually wins. Older units with parts that are hard to find are often better replaced. We give you both prices in writing.
Most repairs run from $250 to $900, and a motor replacement typically costs $600 to $1,800. Call (940) 412-7340 for a free written estimate with the full scope itemized.
Yes. A live person answers our phones around the clock, including holidays. A gate stuck open leaves your property exposed and a gate stuck shut blocks vehicles, so we treat both as urgent.
Every repair carries a written Kingswell Guarantee on the invoice. If the work is not done right within 365 days, we come back and fix it at no charge. That is the 365-Day Done Right Promise.
Schedule Your Gate Motor Repair Today
Gate stuck or slow? Call Portcullis Gate Repair at (940) 412-7340 for a no-obligation written estimate. A live person answers around the clock. You’ll get a real arrival window, a clear price before any work starts, and the 365-Day Done Right Promise in writing.
Written by Dean Prescott, Owner at Portcullis Gate Repair, serving customers nationwide since 2008.