Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Lighthouse Point
Gate installation in Lighthouse Point runs $2,400 to $9,800 for most residential jobs, with swing gates on the lower end and custom double gates with operators at the top. We respond to Lighthouse Point within 24 hours for most estimates, and every quote is written and agreed before we order a single part. Call (940) 412-7340 and you’ll get a live person, not a voicemail tree. We know this city’s gates because we work them every week, from the canal-front estates near the Yacht Club to the quiet streets off Sample Road. The canals here do things to gate hardware that inland Broward never sees, and we plan every installation for that reality from the first measurement.
Why Portcullis Gate Repair Is Lighthouse Point’s Preferred Gate Installation Company
Lighthouse Point homeowners call us because we answer, we show up in the window we give, and we put the Kingswell Guarantee on every invoice in writing. That means a written price before work starts, a real arrival window, a clean job site, and a written guarantee on the installation. If the repair or install fails inside 365 days, we come back and fix it at no charge under the 365-Day Done Right Promise. That’s not a franchise slogan. It’s stamped on the paperwork.
Our technicians are background-checked and show up in uniform, so you know exactly who’s at the gate before the truck door opens. We service nine operator brands, including Linear, DoorKing, and Viking, which matters here because Lighthouse Point is full of legacy systems that newer crews won’t touch. Dean Prescott, who leads our team, insists that every tech can explain what’s failing in plain English before quoting a fix. That local knowledge means fewer wrong parts and fewer second visits.
Response to Lighthouse Point is fast because dispatch and scheduling are coordinated from our Miami office, with crews serving the city locally. When a gate fails after a storm or a 1960s operator finally rusts out, we can usually get someone to your property within a day for the estimate and often the same week for installation.
Gate Installation Services in Lighthouse Point
Gate Installation Services in Lighthouse Point cover everything from a single pedestrian gate to a full double swing entry with automation. Here’s what that actually means on the ground: we measure the opening, check what’s left of the existing posts and pilasters, spec the right operator for your gate’s weight and cycle count, and install the whole system so it runs clean and fails safe. A basic single swing gate with operator in Lighthouse Point starts around $2,400; a double swing with two operators and safety edges runs $5,500 to $7,800; and a custom estate-style slider with NEMA 4X-rated enclosure can reach $9,800 when we’re also replacing posts and running new conduit.
Driveway, Pedestrian, and Double Gate Systems
Most Lighthouse Point homes have an estate-style driveway entry, often original to the 1960s or 1970s build, with a pedestrian gate beside it or set into the main panel. We install driveway gates as swing or slide, and pedestrian gates as standalone units with their own operator or a maglock. Double gates need matched operators and a center stop that can hold both panels in a hurricane gust, which is a bigger engineering question here than in most cities.
Security and Slide Gates on Canal-Front Lots
Canal-front properties in Lighthouse Point often want a security gate that keeps foot traffic off the dock while letting the homeowner in without getting out of the car. Slide gates work well on wider openings, but the salt air here means the operator enclosure and every electrical contact must be marine-grade or rated NEMA 4X from day one. We quote it that way as the baseline, not an add-on.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Electric Gate Installation in Lighthouse Point
Electric Gate Installation in Lighthouse Point means automating a manual gate or replacing a dead operator on an existing automated gate. The work includes the motor, the control board, safety photocells per UL 325, the receiver or keypad, and the wiring run from the house to the gate post. On older Lighthouse Point properties, that also means digging out conduits that have been flooded by canal surge and rerunning them in sealed, properly sloped pipe. A straight operator swap on a single swing gate typically runs $1,400 to $2,800 parts and labor; a full electric install on a new double gate runs $6,000 to $9,800 depending on operator brand and post work.
UL 325 Compliance and Entrapment Protection
Any new automatic gate in Lighthouse Point must include entrapment protection per UL 325: photocells that stop and reverse the gate if someone crosses the path, plus contact edges on pinch points. Older gates hung before these rules exist are everywhere in this city, and many of them are not compliant. We bring them up to spec on every install, and we tell you plainly what that adds to the price before the work begins.
Retrofitting Legacy Operators vs. Replacing the Gate
Some Lighthouse Point gates from the 1960s and 1970s have a panel worth saving but an operator that is past saving. We can often retrofit a modern Linear or Viking operator onto an older gate, replacing the control board, arms, and safety gear while keeping the existing panel. When the posts have shifted or the panel itself is rusting through, replacement is the cheaper honest answer, and we’ll tell you that with numbers on paper rather than selling you a patch.
Trusted Brands We Service in Lighthouse Point
We install and service Linear, Viking, DoorKing, and Ghost Controls operators in Lighthouse Point, and we keep the most common control boards, remote receivers, and safety edges stocked in our local vans. That means when a DoorKing board salt-pits out on a canal-front slide gate, we’re not waiting on a two-week order. We carry parts for all nine major brands we service, and because our techs train on the specific operator rather than learning in your driveway, most Lighthouse Point installs run start to finish in a single visit.
Common Gate Installation Problems We See in Lighthouse Point Homes
- Salt-pitted control boards on operators nowhere near the water. The canal humidity in Lighthouse Point migrates inland block by block. We replace terminal blocks and control boards that look like they sat in a marina, even on side streets a half mile from any canal.
- Original masonry hinge posts that have shifted. Ground saturation over fifty years moves brick and concrete pilasters out of alignment. A new gate hung on the old footing sags within months unless we correct the post first.
- Flooded underground wiring conduits after storm surge. Hurricane-season water from the canals gets into conduit runs and corrodes the wiring from the inside out. Standard conduit fails here; sealed and sloped runs are the only way to keep a gate powered through the fall.
- Legacy operators built before modern safety edges existed. Many Lighthouse Point gates have no photocell and no contact edge. They run, but they don’t stop if a child or dog crosses the path. Every installation we do brings that gate up to current UL 325 standard.
Pricing for Gate Installation in Lighthouse Point, FL
Here are honest ranges for Lighthouse Point work. A single swing gate with operator runs $2,400 to $4,200. A double swing gate with matched operators runs $5,500 to $7,800. A slide gate with NEMA 4X-rated enclosure runs $5,000 to $9,800, depending on gate length and post work. Retrofitting a new operator onto an existing gate runs $1,400 to $2,800. What shifts the number: whether we’re reusing posts or setting new ones, the gate’s weight and cycle frequency, the operator brand, and whether the existing conduit survived the last storm season. Every quote is written, itemized, and agreed before we start. Call (940) 412-7340 for a free estimate, and we’ll give you the number in writing, not a ballpark over the phone.
We Also Serve Cities Near Lighthouse Point
Our Gate Installation crews work across South Florida and beyond. If you’re in Lighthouse Point, we’re local. If you’re in Jacksonville, Miami, Tampa, or Orlando, we can schedule an estimate there too. For the full picture of our work in this area, see Gate Installation in Lighthouse Point and give us a call at (940) 412-7340.
Serving Lighthouse Point, FL - Our Local Coverage Area
We’re based in the Lighthouse Point area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Lighthouse Point
Yes, in many cases we can retrofit a modern operator onto an existing gate, replacing the control board, arms, and safety gear while keeping the panel. But if the hinge posts have shifted or the panel is rusting through at the seam, replacement is cheaper over five years than repeated sag corrections, and we’ll show you both numbers on paper before you choose. Call (940) 412-7340 and we’ll assess it in person.
Because Lighthouse Point’s canal humidity migrates inland block by block, so salt-laden air reaches operators that are a half mile from any visible water. Your terminal blocks and control board are corroding from ambient humidity alone. The fix is a NEMA 4X-rated enclosure, and it’s the baseline we quote here, not an upsell.
Yes, every new automatic gate in Lighthouse Point must include entrapment protection per UL 325: photocells that reverse the gate and contact edges on pinch points. If your existing gate lacks them, we bring it up to code on any installation. It’s a safety requirement, not an option.
The hinge posts or pilasters have likely shifted from decades of ground saturation, and the gate panel is carrying load it was never designed for. We reset and level the post before rehanging the panel, because hanging a new gate on a shifted footing just repeats the problem within months. Call (940) 412-7340 for a free look.
We see a surge in calls every fall for bent slide gates, knocked-off stops, and flooded conduits. For new installations we spec sealed and sloped conduit runs, NEMA 4X enclosures, and center stops that hold panels in a wind gust, so the gate survives the next season instead of becoming a repair call. Every quote accounts for that from day one.
Call Portcullis Gate Repair for Your Lighthouse Point Gate Installation
Whether you’re retrofitting an operator on a 1970s estate entry or replacing a rusted-through slide gate on a canal-front lot, we’ll give you a written price, a real arrival window, and a 365-day guarantee on the work. We replaced a rusted-through LiftMaster operator on a slide gate off a canal-front lot near the Lighthouse Point Yacht Club, where the original control board had salt-pitted terminal blocks and the rack and pinion was seized. After resetting the post footing and leveling the rail, we hung a new operator inside a NEMA 4X enclosure and added a safety photocell per UL 325. The gate has run clean through two hurricane seasons since. That’s the Kingswell Way: say the price before the work, show up in the window we gave, leave the site cleaner than we found it, put the guarantee in writing, and come back if it fails. Call (940) 412-7340 today for a free estimate.
Written by Dean Prescott, Owner at Portcullis Gate Repair, serving Lighthouse Point with the Kingswell Guarantee since 2008.