Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Temple Terrace
Gate installation in Temple Terrace, FL usually falls into one of two jobs: replacing a rusted chain-link or wooden gate from the 1960s ranch era, or retrofitting a modern operator onto an 80 to 100-year-old wrought iron gate that still carries real historic character. Most new driveway gate installations here run $2,800 to $6,500 for a standard single swing gate with operator, and $4,500 to $9,500 for a double gate. We are Portcullis Gate Repair, a Kingswell company, and we have been doing this work since 2008. Call (940) 412-7340 and a live person answers, any hour, any day.
Why Portcullis Gate Repair Is Temple Terrace’s Preferred Gate Installation Company
Temple Terrace is not like New Tampa or Riverview. This city was built in the 1920s as one of Florida’s first planned Mediterranean Revival communities, and the gates here reflect that. We get calls from homeowners near the Temple Terrace Golf & Country Club, along Riverhills Drive, and through the 33617 ZIP code who own ornamental iron gates original to their homes. You do not want a technician who treats a 1929 wrought-iron swing gate like a vinyl fence panel. Our crews know the difference.
Every technician who arrives in Temple Terrace is background-checked, uniformed, and familiar with the city’s protected-canopy tree rules before they start digging near a live oak. And every job starts with a written price, quoted and agreed before a single bolt is turned. That is the Kingswell Way: say the price before the work, show up in the window we gave, leave the site cleaner than we found it, put the guarantee in writing, and come back if it fails. Each Portcullis location is independently owned and operated, but every one is held to that same written standard. Dean Prescott, our owner, has run the service side of this company with that rule front and center since 2008.
Electric Gate Installation in Temple Terrace
Electric Gate Installation in Temple Terrace means pairing a motorized operator with a gate that was often never designed for automation. The actuator, the motorized arm that physically pushes or slides the gate, has to be sized and mounted correctly for the gate’s weight and swing. Then the control board, keypad, safety loops, and power supply all have to work together. This is not a one-size job, especially on the older iron gates common to the original Temple Terrace golf-course neighborhoods.
Operator Retrofit on Historic Iron Gates
A proper retrofit starts with the gate itself. If the post is solid and the hinges are tight, we can mount a modern operator like LiftMaster, Linear, or Viking and hide the control wiring along the inside rail. We also install a surge-protected control board as standard here, because Temple Terrace sits in one of the highest lightning-strike-density corridors in the continental U.S. A board without surge protection lasts about one good June thunderstorm.
New Electric Gate Systems
When the existing gate is past saving, a new electric swing or sliding gate in Temple Terrace typically runs $3,200 to $7,800 installed, including the operator, loops, keypad, and safety edges. We do not promise same-day installation on new electric systems. This work is measured, ordered, and scheduled. What we do promise is a free measure and a written price before any work is approved.
Driveway Gate Installation in Temple Terrace
Driveway Gate Installation in Temple Terrace often starts with a gate that has been hanging since the Eisenhower administration. Post-WWII ranch homes in the 33617 and 33637 areas frequently have original chain-link or wooden driveway gates that are now rusted, sagging, or dragging on the concrete. Replacing them with an automated aluminum or steel gate changes both security and curb appeal, but the condition of the posts decides whether this is a half-day job or a two-day job.
Single Swing Driveway Gates
A single swing driveway gate in Temple Terrace, with a new operator and standard keypad, typically runs $2,800 to $5,400 depending on gate width and material. Aluminum gates weigh less and resist rust better in the river humidity, which is why we recommend them over raw steel for most Temple Terrace properties.
Double Swing and Sliding Gates
Double driveway gates are common on the wider lots along the Hillsborough River corridor and around the golf course. A double swing gate installation with operator usually runs $4,500 to $9,500. Sliding gates work better on slopes and short driveways, and they run $4,000 to $8,500 installed. Both include safety loops and photo eyes sized to the gate’s travel path.
Trusted Brands We Service in Temple Terrace
Our technicians are certified to work on nine major gate-operator brands, and in Temple Terrace we see a lot of DoorKing, Linear, and Viking units on older homes. DoorKing control boards from the 1980s and 1990s are still running on plenty of Temple Terrace properties, and when a lightning strike fries one, we usually have the replacement board on the truck for same-week repair. We carry local parts stock for Temple Terrace customers, which cuts the wait when a vintage Linear keypad dies or a Viking actuator gives out. If you have a Ghost Controls system, we service those too.
Common Gate Installation Problems We See in Temple Terrace Homes
- Surge-fried control boards and keypads. Temple Terrace sits in one of the highest lightning-strike-density zones in the United States, and June through September storms regularly take out gate operator boards. We install surge protection on every new operator here.
- Corroded buried conduit near the river. Year-round humidity plus seasonal flooding in low-lying lots along the Hillsborough River corrodes underground electrical conduit faster than in inland neighborhoods. This causes intermittent power cuts and shorted loop detectors that are hard to diagnose without local experience.
- Live oak roots heaving gate post footings. The massive protected oaks that line Temple Terrace’s historic streets send surface roots under gate posts and slowly shift them. A sagging gate here is often not a hinge problem; it is a footing problem.
- Legacy operators on 1920s-1950s iron gates. Many original ornamental gates in Temple Terrace were hung before modern safety requirements existed. They lack proper stops, safety edges, and electronic eyes. Retrofitting them means adding those safety features, not just bolting on a motor.
Pricing for Gate Installation in Temple Terrace, FL
Here is what Gate Installation in Temple Terrace, FL typically costs, in real numbers. A basic single swing gate with an operator starts around $2,800 and runs to about $5,400. A double swing gate runs $4,500 to $9,500. A sliding gate runs $4,000 to $8,500. Pedestrian gate installation runs $900 to $2,800 depending on width and whether you want a keypad entry. Obsolete control board replacement on a legacy DoorKing or Linear unit runs $380 to $850. Adding surge protection runs $150 to $300. The written price you approve before work starts is the price you pay. Call (940) 412-7340 for a free estimate on any of this.
We Also Serve Cities Near Temple Terrace
Our crews handle Gate Installation across the Tampa Bay region and beyond. We also serve Jacksonville, Miami, Tampa, and Orlando with the same Kingswell Guarantee on every job. If you are outside Temple Terrace, you can find details on our Temple Terrace service area page or call (940) 412-7340 and we will confirm coverage while you are on the line.
Serving Temple Terrace, FL - Our Local Coverage Area
We’re based in the Temple Terrace area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Temple Terrace
Yes, in most cases we can. We have done exactly this on homes near the Temple Terrace Golf & Country Club where the original ironwork is too valuable to scrap. The job involves verifying the post depth and squareness, reinforcing hinges if needed, then mounting a modern operator with surge protection and modern safety edges. Your quote covers the full retrofit, written before any work starts, and the repair carries the 365-Day Done Right Promise.
Temple Terrace sits in one of the highest lightning-strike-density corridors in the continental United States, and unprotected gate control boards are a common casualty. A nearby strike can travel through power and phone lines and fry the board in seconds. The fix is a surge-protected board and properly grounded power, which we install on every new operator in Temple Terrace. Call (940) 412-7340 if your gate went dead after a storm.
When a gate post is within the protected root zone of a live oak in Temple Terrace, concrete work near the roots may require coordination with the city arborist. We handle that conversation before we dig. We did this recently on a 1929 bungalow near the golf course where oak roots had heaved a hinge post; we re-set the post with a deeper footing after the arborist signed off, and the original iron gate is still swinging properly.
For a chain-link gate where the posts are still straight and set firm, repair is often the cheaper call and automation can usually be added with a linear actuator. But in Temple Terrace’s humidity, rusted chain-link frames often hide enough internal corrosion that replacement is cheaper within two years. Where the post has shifted from oak roots or the frame is rusted through, a new aluminum gate with an operator is usually the honest answer. We will give you both options in writing before you decide.
Yes. We service DoorKing, Linear, Viking, Ghost Controls, and Elite, among nine brands total. Temple Terrace has a lot of 1980s and 1990s DoorKing and Linear units still in service, and we stock local parts in the area for faster turnaround on those legacy boards and remotes. If the unit is beyond saving, we will tell you what a replacement costs and offer a written price before any swap happens. Call (940) 412-7340 with your model number and we can usually tell you over the phone what you are looking at.
If you need Gate Installation in Temple Terrace, call (940) 412-7340 for a free estimate. A live person answers 24 hours a day, 7 days a week. You will get a written price before any work starts and a written Kingswell Guarantee covering every repair for 365 days.
Written by Dean Prescott, Owner at Portcullis Gate Repair, a Kingswell company serving Temple Terrace since 2008.