Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Haslet
Gate repair in Haslet most often comes down to two things: a hinge post that’s tipped out of plumb in the black gumbo clay, or an opener that was never matched to the gate it’s driving. We fix both. Portcullis Gate Repair has been handling residential and commercial gates across Haslet since 2008, sending background-checked, uniformed technicians who arrive with the price in writing before a single bolt is turned. If your gate is dragging, binding, or refusing to open at all, call us at (940) 412-7340 and a live person answers, day or night.
You’ll find our Gate Repair team on acreage parcels near Harmon Road, in newer subdivisions off Avondale-Haslet Road, and everywhere between. We know this town’s gates the way a local should: we know the soil, we know the operator brands that keep showing up on retrofitted farm gates, and we know what fixes actually last here.
Why Portcullis Gate Repair Is Haslet’s Preferred Gate Repair Company
Every Portcullis location is independently owned and operated, but held to the same written Kingswell Guarantee: a written price before any work starts, a real arrival window, a clean job site, and a written guarantee on the repair. That’s not a franchise slogan. It’s stamped on every invoice we hand a Haslet customer.
Our lead in Haslet is Dean Prescott, who runs local scheduling and dispatch from the Dallas-Fort Worth office so crews reach Haslet addresses without a long wait. Haslet homeowners call us because the person who answers the phone at 2 a.m. is the same company that sends a uniformed technician the next morning, not a call center three states away. And if a repair fails within 365 days, we come back and fix it at no charge under the 365-Day Done Right Promise. That’s the Kingswell Way, and it means something on a wide farm gate that has to work every time.
Wood Gate Repair in Haslet
Wood gate repair in Haslet usually means one of two jobs: replacing a rotted post or re-hanging a gate that’s sagged because the post footing shifted in expansive clay. We start by checking the post rather than guessing at the hardware, because Tarrant County’s wet-dry cycles heave footings enough to make a perfectly good gate panel miss its latch. Once the post is reset and the gate re-aligned, we’ll check hinges, the latch throw, and any opener that’s mounted to the structure.
Post Re-Setting and Footing Work
On Haslet’s acreage lots, the old cedar and treated-pine posts that carry wood driveway gates eventually rot at the soil line or lean as the clay contracts in summer. We dig out the old footing, set the post in fresh concrete with proper drainage, and re-hang the gate so it swings true. A typical post re-set and re-hang in Haslet runs $350-$650, depending on post size and whether we’re pouring new footings or shimming an existing one.
Gate Leaf Repair and Hardware
Sometimes the panel itself is the problem: a split rail, a rotted bottom rail, or hinges pulling loose. We’ll rebuild the leaf, replace the hinge straps, and re-seat the latch. Straight hardware-only repairs in Haslet typically run $150-$400. If a wood gate is too far gone, we’ll say so and quote a replacement before touching anything, not after.
Driveway Gate Repair in Haslet
Driveway gate repair in Haslet usually involves a wide swing gate on an acreage parcel, often a tubular-steel or wood gate that was built years ago and later had an electric opener added. For dedicated service on the powered side, see our Electric Gate Repair in Haslet. The repair pattern is consistent: the hinge post tilts in the clay, the gate drags, and the opener burns itself out fighting the extra resistance. We correct the post, re-align the operator mount, and replace the stripped drive gear. That’s the job, and we quote it before we start.
Swing Gate Post and Hinge Correction
Haslet’s black gumbo soil expands and contracts enough to tip even a well-set post over two or three seasons. When a wide gate starts scraping the ground or missing the latch, the post is usually the culprit, not the gate itself. Re-setting a steel or pipe gate post with a new footing in Haslet typically runs $300-$700, and we always re-check the gate’s full swing arc before we call it done.
Operator Re-Alignment and Drive Gear Replacement
We see a lot of openers welded or bolted to old farm gates at odd angles, especially along Harmon Road. When the mount is off, the drive gear wears in a pattern it was never designed for, stripping teeth and killing motors early. Re-aligning the mount and replacing a stripped drive gear in Haslet runs $250-$600 for most residential swing-gate operators, including the part and the labor.
Trusted Brands We Service in Haslet
Portcullis Gate Repair technicians train on nine major gate-operator brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In Haslet, we carry common parts for LiftMaster and Linear arms on our trucks, which means faster turnaround when your opener quits. We also service Viking and DoorKing units on commercial gates along the Alliance corridor. You tell us the brand on the arm, and the technician who shows up already knows how it’s built.
Common Gate Repair Problems We See in Haslet Homes
- Tilted hinge posts from black gumbo heave. The clay under Haslet expands after rain and contracts in drought, shifting post footings a fraction of an inch at a time. The gate starts dragging or missing the latch even though nothing looks bent or broken, and the fix is re-setting the post, not chasing the panel.
- Opener mounts welded at improvised angles on old farm gates. Wide tubular-steel gates built for manual use got LiftMaster or US Automatic openers bolted on later. The bracket angle is never quite right, so the motor overworks, the drive gear strips, and the opener dies years early.
- Ice storm damage to slide-gate tracks. Haslet sits in the Alliance/Haslet ice-storm corridor. When freezing rain glazes the track or the photoelectric sensors, the gate stalls or refuses to close. We handle the thaw-out and the repair, but the safety edge and photo-eye have to be verified before the gate goes back into service.
- Safety sensor and entrapment protection failures. Older automatic gates around Haslet sometimes lack proper entrapment protection or have dead photo-eyes. That’s a safety problem, not a convenience problem, and we test every sensor as part of any opener repair.
Pricing for Gate Repair in Haslet, TX
Here are real Haslet market ranges, written the way we quote them: hinge and post re-set jobs run $300-$700; drive gear replacement runs $250-$600; wood gate post re-setting and re-hanging runs $350-$650; hardware-only repairs like latches and hinge straps run $150-$400. Wider gates, heavier panels, and post-footing replacement push toward the top of each range. Before any work starts, you get the exact number in writing, and that’s the number on the invoice. Call (940) 412-7340 for a free estimate on your gate.
We Also Serve Cities Near Haslet
Haslet sits close to Gate Repair in Haslet neighbors like Keller, Roanoke, Newark, and North Richland Hills. If your property is just outside Haslet proper, we’ll tell you straight whether the address falls in our local service area, and we’ll give you an honest arrival window either way.
Serving Haslet, TX - Our Local Coverage Area
We’re based in the Haslet area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Haslet
On Haslet acreage, it’s usually the post. When the hinge post tilts even a few degrees in the black clay, the gate’s weight shifts onto the opener mid-swing, tripping the motor or stalling it. We check the post and the full swing arc first, before blaming the operator. If the post is sound, we test the limit settings and the drive gear. Call (940) 412-7340 and we’ll diagnose it on site with a written quote before any repair.
Yes, and it’s common on Haslet’s acreage parcels where running conduit hundreds of feet costs more than the opener. We install and service solar-ready operators from Linear, Ghost Controls, and Mighty Mule, sized to your gate’s weight and daily cycle count. The panel needs clear south exposure, and the battery should be checked yearly. We’ll spec it properly, not guess.
Because the opener mount was likely welded or bolted at an angle the motor wasn’t designed to push against. That misalignment loads the drive gear unevenly and strips teeth fast. We re-align the mount, replace the gear, and re-check the hinge post at the same time, since a leaning post only accelerates the wear. It’s the single most recurring repair pattern on Harmon Road farm gates.
Check whether the track is glazed with ice and whether the photo-eye lenses are iced over. Don’t force the gate with the manual release while the operator is still energized, and don’t chip ice out of a live track. If the mechanism is frozen solid or the sensors are dead, call (940) 412-7340 and we’ll address it as an emergency at a written price, same as any Haslet repair.
Yes, any automatic gate in Haslet should have a working entrapment protection system, typically photo-eyes and a reversing edge on the moving leaf. If your gate predates those requirements or the sensors have failed, we’ll test them and quote the retrofit before any other work proceeds. The safety function isn’t optional, and we won’t sign off on an opener repair without it.
Call Portcullis Gate Repair in Haslet
If your gate is dragging, binding, frozen, or dead, call (940) 412-7340 for a free estimate. You’ll get a real person, a real arrival window, and a written price before any work begins. That’s the Kingswell Guarantee, and it applies to every Haslet job we do.
Written by Dean Prescott, Owner at Portcullis Gate Repair, serving Haslet and the surrounding Tarrant County area.