Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Gate Company in Mount Vernon, NY
Most gate repairs in Mount Vernon come down to one thing: iron and steel that has spent a century absorbing road salt, freeze-thaw movement, and Bronx-bound traffic exhaust. Our technicians work on gates set into original concrete stoops and party walls, not the freestanding posts you see in northern Westchester. If you need a gate company in Mount Vernon, NY that understands row-house ironwork, shared footings, and hardware corroded well past its expected lifespan, call (940) 412-7340 and we’ll put the price in writing before anything gets touched.
Why Mount Vernon Homes Are Different
Mount Vernon is Westchester County’s most densely populated city, and it shares a direct southern border with the Bronx. That geography shapes the gate work here more than any other factor. Blocks of pre-WWII row houses and two-family homes, most built between the 1890s and 1940s, front onto sidewalks with ornamental wrought iron gates that have been there since the day the stoop was poured. Unlike a detached home in Scarsdale or Ardsley, these gates are often mortared into shared boundary walls or set into concrete that has cracked, heaved, and shifted over eight to ten decades of freeze-thaw cycles.
The salt load adds another layer. Mount Vernon streets receive heavy road salt application every winter because of dense traffic, and that salt spray carries onto gate posts, hinges, and latch hardware. Rust penetrates faster here than in quieter Westchester towns. By mid-spring, we routinely see gates on South Side blocks where the hinge pins have seized, the post base has rotted through, or the latch no longer catches because the whole frame has moved a half-inch out of alignment.
On South Side blocks near the Bronx line, many row-house lots share a continuous boundary fence. A gate post that looks freestanding is often mortared into a party wall or a shared footing with the house next door. That means a hinge replacement can quickly become a conversation about the neighbor’s wall, the footing below it, and who owns what. We handle those structural conversations as part of the job, because in Mount Vernon they come with the territory.
Our Main Mount Vernon Services
Mount Vernon homeowners call us for three things more than anything else: gates that have sagged or seized on original posts, new gates and frames that need to be set correctly into old stoops, and electric openers that have failed after years of exposure. Each service has its own Mount Vernon page linked below.
Gate Repair in Mount Vernon
Hinge replacement, post straightening, latch and lock repair, and full re-hanging of wrought iron gates are the core of our work in Mount Vernon. The typical repair here starts with a gate that has dropped a half-inch and now drags on the sidewalk. We diagnose whether the movement is in the hinge, the post, or the shared footing, then fix all three in one visit where possible. On row-house properties, we account for the neighbor’s wall before we lift or shim anything. See the full breakdown on our Gate Repair in Mount Vernon page.

Gate Installation in Mount Vernon
New gates in Mount Vernon usually go onto existing stone or concrete stoops that are 80 to 100 years old. The concrete is rarely level, and the post bases are often the first thing to address. We measure the opening, order steel or iron to match the house’s original sight lines, and set the new posts so the gate hangs correctly on day one. A written price covers the full job before we start. Details are on the Gate Installation in Mount Vernon page.

Electric Gate Repair in Mount Vernon
Electric gate systems in Mount Vernon fail most often at the operator, the actuator, or the safety edges. Salt corrosion eats connectors and wiring; freeze-thaw cycles strain the motorized arm that pushes the gate open and closed. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems, and we carry common Mount Vernon replacement parts on the truck. Get the full scope of repairs, parts, and what we cover on the Electric Gate Repair in Mount Vernon page.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Mount Vernon
Our Mount Vernon technicians carry parts for the operators we see on local properties most often: Linear, Viking, Ghost Controls, and DoorKing, alongside five other major brands. That means most electric gate repairs in Mount Vernon get completed the same day the truck arrives. We stock boards, arms, receivers, and safety-edge parts locally. See our brands for the full list.
Pricing for Gate Company in Mount Vernon, NY
| Service | Typical range in Mount Vernon |
|---|---|
| Hinge replacement on a wrought iron gate | $180 - $340 |
| Post straightening and re-setting | $220 - $480 |
| Full gate re-hang and alignment | $280 - $540 |
| Latch and lock replacement | $120 - $220 |
| Wrought iron rust treatment and repaint | $350 - $700 |
| Actuator swap on a swing gate | $400 - $800 |
| Control board replacement | $350 - $620 |
| Safety edge replacement | $180 - $320 |
| New gate and frame installation | $2,200 - $5,500 |
| Electric gate opener installation | $1,400 - $3,200 |
Prices in Mount Vernon run higher when the gate post is set into a party wall, when the concrete stoop needs cutting and repair, or when rust has eaten the post base below grade and the whole assembly has to come out. You will always get the price in writing before any work starts, and that written price is what you pay.
Neighborhoods We Serve in Mount Vernon
We serve every part of Mount Vernon, including the South Side blocks along the Bronx border, Fleetwood, Chester Heights, North Side, and the downtown residential streets. Most neighborhoods are reachable within 45 to 60 minutes from the time we commit to a window.
- Fleetwood
- South Side
- Chester Heights
- North Side
- Downtown Mount Vernon
Service Area – Cities Near Mount Vernon
We also serve surrounding communities including New Rochelle, NY, Yonkers, NY, Bronx, NY, and White Plains, NY. Dispatch and scheduling are coordinated from the brand’s New York City office; crews serve Mount Vernon locally. If you live in a nearby city, the same written-price and written-guarantee standard applies.
Serving Mount Vernon, NY - Our Local Coverage Area
We’re based in the Mount Vernon area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Mount Vernon
Most Mount Vernon properties are reachable within 45 to 60 minutes from the time we commit to a window. Same-day availability runs strong during the week; evenings and weekends are available for urgent gate failures. Call (940) 412-7340 for today’s schedule.
Most hinge, latch, and operator repairs do not require a permit. New gate installations and structural post work may, depending on scope and the building department’s current requirements. We check before the job starts and include any permit coordination in your written quote. Call (940) 412-7340 for guidance on your specific property.
South Side row-house gates often share a footing or party wall. We assess the shared structure first and, where needed, coordinate with the adjoining property owner before we lift or reset anything. The goal is one repair that holds for both sides, with no surprises for either neighbor.
Yes. We repair and install gates for Mount Vernon apartment buildings, storefronts, and small commercial lots. Commercial jobs get the same written price, arrival window, and 365-day written guarantee as residential work. Call (940) 412-7340 to schedule a site review and get a written estimate.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Mount Vernon Customers Say
"Gate was dragging and screeching across the driveway. I figured I'd need a whole new setup. He adjusted the track and rollers and it was a fraction of what I expected. Honest work."
- Omar Haddad"Our intercom and gate motor both quit. They fixed the whole system in one visit and explained the warranty clearly. On time, polite, and tidy. Can't ask for more."
- Yvette Marchetti"Good repair on a sagging gate and a new hinge welded on. Took them a couple days to get the part in, but they told me that up front and it's been solid since."
- Hector Villanueva





Before
After
Before
After
Before
After