Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Arlington, TX
Gate repair in Arlington, TX usually comes down to one thing before anything else: the black gumbo clay under the posts. Most Arlington homes sit on expansive soil that swells after spring rain and shrinks through summer heat, slowly pushing posts out of level and causing swing gates to drag, bind, or stop latching altogether. The good news is that most of what we see is fixable in a single visit, and we always give you a written price before a single bolt gets turned. If you’re dealing with a gate that won’t shut or a motor that won’t respond, call (940) 412-7340 and we’ll get you scheduled.
Why Arlington Homes Are Different
Arlington’s residential streets are filled with homes built during the 1970s through 1990s boom, and most of them have wood privacy-fence gates hung on posts set directly into that expansive clay. You can spot the telltale signs walking any block in southwest Arlington: a gate that scrapes the ground on one side, a latch that misses its strike plate by half an inch, hinges pulling away from the post. None of that is accidental. It’s what happens when the soil heaves and shrinks season after season.
The newer HOA master-planned communities along the I-20 corridor and near Lake Arlington added ornamental iron gates and automated driveway gates late in the 1990s and through the 2000s. Those systems are now old enough that their operator boards, safety loops, and actuators are entering their first major service cycle. We see more than a few LiftMaster and DoorKing operators in those neighborhoods, and many are still running original boards that are well past their expected lifespan.
There’s also a compliance layer here that doesn’t exist in a lot of surrounding cities. Many HOA-governed communities require written architectural committee approval before a failed operator can be swapped for a different brand or model. A technician who skips that step can create a mandatory removal and reinstall situation. We check the HOA’s gate specifications before ordering any replacement hardware in those neighborhoods.
And then there’s the heat. Arlington summers routinely pass 100 degrees, and that causes metal frames and tracks to expand enough that a gate that opened cleanly all spring starts binding against its rollers by August. The wet-dry cycle compounds the clay movement, so a gate that was level in March is often out of plumb by October. That’s less a problem with the gate and more a problem with what the gate is standing in.
Our Main Arlington Services
Most Arlington homeowners call us for one of two things: a swing gate that won’t swing, or an electric gate that stopped responding to its remotes and keypads. Here’s how we handle each one in Arlington.
Gate Repair in Arlington
Most residential repair calls in Arlington involve re-setting or re-hanging a gate that the clay has moved. We re-set posts, re-align hinges, replace sagging cross-braces, and weld cracked ornamental iron where needed. The goal is always the same: a gate that swings straight, latches cleanly, and stays working without you having to lift it. We work with wood, iron, chain-link, and aluminum frames, and every repair goes through the same process: a written price first, then the work, then a written 365-day guarantee on the repair itself. Gate Repair in Arlington
Gate Installation in Arlington
New gates in Arlington need to be set with the clay cycle in mind, and that changes how we dig, brace, and concrete the posts. We install wood, ornamental iron, aluminum, and chain-link driveway and walk gates sized for the opening and weight of the panel. For automated gates, we coordinate the posts, hinge alignment, and operator mounting so the gate runs smooth from day one and doesn’t fight its own weight. Every project begins with a free measure and a written price. Gate Installation in Arlington
Electric Gate Repair in Arlington
Electric gate problems in Arlington split roughly into two groups: operator failures, and installations that never worked quite right. We carry service parts for Viking, Ghost Controls, DoorKing, Elite, and several other brands, and our technicians can usually reset limits, replace a dead actuator, or swap a failed control board on the same visit. When we finish, the gate runs through a full open-close-open cycle so you see it working before we leave, not after. Electric Gate Repair in Arlington
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Arlington
We service Viking, Ghost Controls, DoorKing, and Elite equipment, along with the other major operator brands. We keep the most common replacement boards, actuators, and photo-eye sensors on the trucks serving Arlington, which means many motor repairs don’t require a second trip. More details on our brands.
Pricing for Gate Company in Arlington, TX
| Service | Typical range in Arlington |
|---|---|
| Gate post re-setting | $275-$490 |
| Hinge re-alignment | $175-$320 |
| Latch repair or replacement | $95-$230 |
| Swing gate actuator swap | $380-$790 |
| Opener control board replacement | $275-$580 |
| Photo-eye sensor replacement | $125-$260 |
| Gate wheel roller replacement | $85-$180 |
| Full gate panel replacement | $600-$1,600 |
| Wood fence gate with post replacement | $350-$750 |
What pushes a price up in Arlington is usually the soil and the access. Posts set in unyielding clay can take extra time to break free and re-set, and gates in tight side yards or behind mature oak roots sometimes need a different footing approach. Whatever the job, your price is written down and agreed to before any work begins, and it doesn’t change after we’ve opened the gate up.
Neighborhoods We Serve in Arlington
We work throughout Arlington, from the older 1970s-era tract neighborhoods east of Collins to the HOA communities spread along I-20 and near Lake Arlington. Our scheduled visits typically land within a one-to-three-hour arrival window, and we confirm that window the day before so you’re not waiting around wondering.
- Southwest Arlington (I-20 corridor)
- Dalworthington Gardens area
- Lake Arlington communities
- Southeast Arlington (Cooper & Matlock area)
- North Arlington (Lamar &. Bowen)
Service Area – Cities Near Arlington
Portcullis Gate Repair serves Arlington and the surrounding cities with the same written-price, written-guarantee standard on every job. If you’re in Mansfield, TX, Kennedale, TX, Burleson, TX, or Cedar Hill, TX, we can schedule a gate repair or service visit for you the same way we do in Arlington: a live person on the phone, a real arrival window, and a written price before any work starts.
Serving Arlington, TX - Our Local Coverage Area
We’re based in the Arlington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Arlington
We schedule most Arlington service visits within one to three business days, with a confirmed arrival window provided the day before. For a gate that won’t close or a property that can’t be secured, we hold same-day slots for that kind of call. Call (940) 412-7340 and tell us what’s happening, and we’ll give you the earliest honest window.
If your HOA requires architectural committee approval for a different brand or model, we’ll confirm what the spec sheet requires before ordering anything. We don’t want you stuck pulling out a brand-new operator because it didn’t match the HOA rules, and neither do you. We check that first, then write the price.
Every repair we do in Arlington carries a written 365-day guarantee. If the repair fails inside that period, we come back and make it right at no charge to you. The guarantee language is printed on your invoice, not described over the phone, so you know exactly what’s covered before you pay the bill.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Arlington Customers Say
"Our driveway gate stopped halfway and wouldn't close, which is a problem when it's the only thing between the street and the yard. They came out same day, replaced the motor, and it's smooth again."
- Leonard Pace"Gate wouldn't respond to the remote or the keypad. Turned out to be the control board. They had the part and swapped it the same visit. Quoted it first, no surprises."
- Everett Shaw"Electric gate kept doing its own thing, opening at random. The tech found a shorted sensor and a worn board, fixed both, and showed me the old parts. Price was what he quoted on the phone."
- Cassandra Pike