Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Broadview Park
A new driveway gate in Broadview Park typically runs $2,400-$6,800 installed, depending on the material, operator, and whether we’re pulling the old footing. That’s the honest range you should expect from a company that does this work here every week. Our Gate Installation team serves Broadview Park with background-checked, uniformed technicians who arrive in the window we commit to, write the price down before a single bolt turns, and stand behind the work with a written 365-day guarantee.
Call (940) 412-7340 and a live person answers. Not a voicemail tree. Not a callback queue. We’ll talk through what you have, what it needs, and what it costs.
Broadview Park isn’t a city. It’s unincorporated Broward County, and that single fact changes how every gate job here has to be handled. We know the county’s wind-load approvals, the marl soil that heaves old post footings, and the salt air off the tidal canals that eats untreated iron at the ground weld. If you’re reading this, you probably have a gate from the 1950s, 60s, or 70s that’s sagging, rusting, or simply done. We’ll tell you straight whether it can be retrofitted or whether replacement is the cheaper answer.
Why Portcullis Gate Repair Is Broadview Park’s Preferred Gate Installation Company
We’ve built our reputation in Broadview Park the way a neighbor would: by showing up, doing the work right, and putting the guarantee in writing. The homeowners here know each other. That matters. A bad job on SW 32nd Court gets talked about over fences and at the canal cleanup days. A good one does too. Dean Prescott leads our crews, and he’s made it clear from day one: we don’t leave a Broadview Park job site until the gate swings true, the operator responds, and the homeowner has a written price and a written guarantee in hand.
Every Portcullis location is independently owned and operated, but held to the identical Kingswell Guarantee. That’s not a franchise marketing line. It’s a written standard: price before work, real arrival window, clean job site, written guarantee. We’ve operated as a Kingswell company since 2008, and the 365-Day Done Right Promise applies on every gate repair and installation we complete. If it fails inside a year, we come back and fix it at no charge.
What does that look like in Broadview Park? It looks like a technician in a uniform pulling up in a marked truck, handing you a written quote for a new swing gate or a Gate Opener Installation, doing the work, sweeping up the rust and concrete dust, and leaving you with an invoice that says exactly what the guarantee covers. That’s how we do it here.
- Written price before any work starts – always, on every job, no after-the-fact surprises.
- Real arrival window – when we say a time, that’s the time.
- 365-Day Done Right Promise – if it’s not done right, we make it right, at no charge.
- Live person answers 24/7 – including holidays, including 2 a.m. when your gate won’t close.
Gate Opener Installation in Broadview Park
Gate Opener Installation in Broadview Park means mounting and wiring a motorized operator to an existing gate, and here that usually starts with a conversation about the gate’s condition before we touch the motor. On homes in Broadview Park, the gates themselves are often 40 to 60 years old, with hinge posts set in footings that have heaved in the expansive marl soil. Mounting a new operator on a frame that’s already pulled out of plumb is throwing good money after bad. Most Gate Opener Installations in Broadview Park run $1,100-$2,800 including the operator, arms or rams, safety photocells, and labor, depending on the brand and whether the existing post can be saved.
We service nine major gate-operator brands, so the tech arriving at your Broadview Park home already knows the specific system on the property. Broadview Park homes over index on older LiftMaster, FAAC, and BFT units that predate current UL 325 entrapment protection requirements. When we install a new operator here, we bring it up to current code rather than just swapping like for like.
Retrofit or Full Operator Swap
If your existing operator is a recognized brand with a sound control board and rack, a retrofit of the motor and safety system can be the economical path. We’ll tell you honestly if the old unit can’t meet current entrapment protection standards without a full replacement. In Broadview Park, especially on double gates with two arms, a retrofit that ignores the sawhorse effect of two leaves on a compound beam is asking for a callback.
Safety Photocells and UL 325 Compliance
Any new gate operator in Broadview Park, whether a retrofit or full installation, has to meet UL 325 entrapment protection. That means non-contact sensors, usually photocells, and an inherent or secondary entrapment protection device. Broward County inspection will catch it if we don’t. We don’t make that mistake.
Gate Fabrication in Broadview Park
Gate Fabrication in Broadview Park means building a new gate from scratch to fit the exact opening, the existing posts, and the county’s wind-load requirements. Most custom-fabricated driveway gates here run $2,400-$6,800 depending on material, size, and operator, with steel and powder-coated aluminum being the most common choices for Broadview Park’s climate. A custom Gate Fabrication job is the right call when the old gate’s frame is rotted at the ground weld, the panel is too far out of square to rehang, or the homeowner wants a gate that meets the county’s post-Andrew wind-resistance standards rather than hoping the old one holds.
The climate in Broadview Park is hard on gates. Year-round humidity, intense UV, and salt-laden air off the tidal canals a few miles away corrode untreated iron and steel at the ground-level welds and hinge plates, often rotting out bottom rails within 10 to 15 years. A fabricated gate that’s built here, for here, uses powder coating and sealed welds to stand up to that environment.
Wind-Resistance Product Approval
Any Gate Fabrication in Broadview Park has to carry a wind-resistance product approval or an engineer’s letter, because the county requires documentation that the gate is rated for the exposure. We pull the footing, pour a county-compliant one, and set a fabricated frame that meets the same standard the inspection will be checking for.
Custom Swing and Double Gate Frames
Most Broadview Park lots are flat, with 6,000 to 8,000 square feet and simple swing-gate driveways. A custom-built double gate with a center drop rod and a matched pair of operators can transform the entry without fighting the existing perimeter fencing. We build the frame here for the exposure here, never off a warehouse shelf.
Trusted Brands We Service in Broadview Park
We carry parts and service experience for all nine major gate-operator brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Broadview Park customers that matters because the older FAAC and BFT units common in this neighborhood often need a specific control board or limit switch that a generalist doesn’t stock. We keep local inventory for the brands most common in Broward County’s 1950s-70s housing stock, so you’re not waiting on a ground shipment from the manufacturer while your gate sits open. Call and ask what we have on the truck for your operator. If we don’t have it, we’ll say so before you commit to anything.
Common Gate Installation Problems We See in Broadview Park Homes
- Heaved post footings in marl soil. Broadview Park’s expansive soils have pushed and cracked the original 1950s-70s footings on most of these lots. A new gate hung on an old post sags again within a season, no matter how carefully we rehang it. If the post is out of plumb, the footing has to come out with it.
- Rotted bottom rails at the ground weld. The salt-laden air off the tidal canals, combined with year-round humidity, attacks the ground-level welds and hinge plates on legacy iron and steel gates. We regularly see bottom rails that are rusted through after 10 to 15 years without regular treatment. Powder coating and sealed welds prevent this on a new gate.
- Obsolete control boards and operators. Many Broadview Park homes still run the original 1990s or early 2000s operator that came with the house. The board is obsolete, the limit switches are worn, and the unit can’t meet current UL 325 entrapment protection. Retrofitting rather than replacing the whole gate is often possible, but you need a tech who can tell you honestly which path costs less.
- Missing Broward County wind-resistance approval. Contractors crossing in from Fort Lauderdale or Davie routinely skip the county’s requirement for a wind-resistance product approval or engineer’s letter. Then the gate fails inspection. We handle the approval as part of the job, so your Broadview Park installation is compliant from day one.
Pricing for Gate Installation in Broadview Park, FL
Here are the ranges we quote most often in Broadview Park:
- Gate Opener Installation (retrofit existing gate): $1,100-$2,800
- Custom Gate Fabrication (single swing, steel, powder-coated): $2,400-$4,500
- Custom Gate Fabrication (double gate, with operators and photocells): $4,800-$6,800
- Pedestrian gate (fabricated, set, hardware): $900-$2,200
- Full removal of old gate, footing pull, new footing, new gate, new operator: $3,200-$6,800
What moves the price is whether the old post survives, whether the operator is a simple arm or a matched pair on a double gate, and whether the county’s wind-resistance documentation requires an engineer’s letter rather than a product approval. You get the price in writing before any work starts. If we can’t save the old post, we tell you that on the estimate, not after we’ve started. Call (940) 412-7340 for a free, written quote. Estimates don’t obligate you to anything.
We Also Serve Cities Near Broadview Park
While this page focuses on Gate Installation in Broadview Park, our crews also serve Jacksonville, Miami, Tampa, and Orlando. If you’re near one of those cities and need a gate installed, fixed, or retrofitted, call (940) 412-7340 and ask for a quote. We’ll tell you straight what the job needs and what it costs.
Serving Broadview Park, FL - Our Local Coverage Area
We’re based in the Broadview Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Broadview Park
Sometimes yes, but in Broadview Park the hinge post is usually the problem, not the panel. The original 1950s-70s footings in this neighborhood have heaved in the expansive marl soil, and the post itself has pulled out of plumb. Rehanging a panel on a post that’s leaning is a short-term fix that sags again within a season. We’ll tell you after we look at it whether the post can be plumbed and re-set or whether the footing has to come out and be re-poured. Call (940) 412-7340 and we’ll come look.
Yes. Any new gate operator in Broadview Park has to meet UL 325 entrapment protection standards, which means non-contact sensors, typically photocells, and an inherent or secondary entrapment protection device. Broward County inspection will flag it if the operator doesn’t comply. We install the photocells and set the limits as part of every Gate Opener Installation, so your gate passes inspection the first time.
Because Broadview Park is unincorporated Broward County, not part of Fort Lauderdale or Davie. The county requires a wind-resistance product approval or an engineer’s letter for any gate replacement, a step that city-side crews routinely skip when they cross into Broadview Park. Your neighbor’s Fort Lauderdale company may have installed a gate that is not actually compliant, and it could get flagged if anyone ever pulls the permit history. We handle the county approval as part of the job, not as an afterthought.
We will. A keypad entry and a loop detector, or a photo-beam exit sensor, are standard items we wire in with new Gate Opener Installation jobs in Broadview Park. The loop detector is cut into the driveway surface and reads the metal mass of a car to trigger the gate, while the keypad mounts on a pedestal or the post for entry codes. Both get wired to the operator’s control board and set up before we hand over the job.
Often yes. A rack-and-pinion operator with a sound control board and a good rack can frequently be retrofitted with a new motor, limit switches, and entrapment protection photocells, keeping the gate itself in place. That’s a $1,100-$2,800 job in Broadview Park, depending on the brand and the condition of the rack. If the rack is worn or the board is obsolete, replacement may be the cheaper answer. We’ll tell you which path costs less before any work starts. Call (940) 412-7340 for a free quote.
Call Portcullis Gate Repair for Gate Installation in Broadview Park
If your Gate Repair - Broadview Park need involves a gate that’s sagging, rusted, or running on a dead operator, call us. Dean Prescott and our Broadview Park crews have been doing this work since 2008. You’ll get a live person on the phone, a written price before any work starts, a real arrival window, and a written 365-day guarantee on every job. That’s the Kingswell Way. Call (940) 412-7340 today for a free estimate.
Written by Dean Prescott, Owner at Portcullis Gate Repair, serving Broadview Park since 2008.